# /etc/hostapd/hostapd.conf

# Interface to use as an accesspoint
interface=ath0

# Driver interface type (hostap/wired/madwifi; default: hostap)
# If you use Atheros-based card then use the madwifi driver
driver=madwifi

# Logging and debugging settings: more of this in original config file
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
debug=0
dump_file=/tmp/hostapd.dump

# SSID to use. This will be the "name" of the accesspoint
ssid=Jetway

# WPA settings. We'll use stronger WPA2
# bit0 = WPA
# bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled)
wpa=1

# Preshared key of between 8-63 ASCII characters.
# If you define the key in here, make sure that the file is not readable
# by anyone but root. Alternatively you can use a separate file for the
# key; see original hostapd.conf for more information.
wpa_passphrase=1234567890

# Key management algorithm. In this case, a simple pre-shared key (PSK)
wpa_key_mgmt=WPA-PSK

# The cipher suite to use. We want to use stronger CCMP cipher.
wpa_pairwise=CCMP

# Change the broadcasted/multicasted keys after this many seconds.
wpa_group_rekey=600

# Change the master key after this many seconds. Master key is used as a basis
# (source) for the encryption keys.
wpa_gmk_rekey=86400